Tire Inflation & Loading
Click here to download RV Tire Maintenance and Inflation Tips
Proper Tire Inflation
Correct tire inflation is a key component in tire care. The recommended maximum inflation pressures for your tires are indicated on the certification label or in your owner's manual. Since RVs can be loaded with many different configurations, the load on each tire will vary. For this reason, actual air pressure required should be determined based on the load on each individual tire. Inflation pressure should be adjusted to handle the tire carrying the heaviest load, and all tires on the axle should be adjusted to this standard.
Each manufacturer provides load and inflation tables specific to their products to help you determine the correct tire inflation pressure for your vehicle's loading.
Underinflation brings a higher risk of susceptibility to damage due to road hazards, reduces casing durability, and causes a loss in fuel economy, plus uneven or irregular tire wear. Severe or prolonged underinflation brings about an increased risk of tread separation.
IMPORTANT: It's a common practice for RV owners to lower tire pressure in their search for a smoother ride. This is not only dangerous, it's relatively ineffective, as the difference in ride quality is not significant. When minimum inflation pressure requirements are not met, tire durability and optimum operating conditions are compromised. Tire inflation pressure should always meet at least the minimum guidelines for vehicle weight.
Tire Inflation Guidelines
Check your tires' air pressures at least once a month, before each trip and each morning you drive during a trip. Tire pressure
should be checked cold, or before you have driven that day, as tire pressure ratings have been designed with typical running
heat/pressure build-up in mind. Remember to check the air pressures of the inside tires in dual fitments and make sure the valves
and caps are free of dirt and moisture.
- It may be necessary to inflate your tires at a truck stop or truck service center in order to achieve adequate air pressure
for your coach's needs
- Only permanent air seal metal valve caps should be used
- Be safe - if a tire has been run 20% underinflated, it must be dismounted and inspected by a trained professional.
It should not be aired up without a fullinspection or without using a safety cage. Use a calibrated gauge. If your tire
is rated for higher inflation pressures, a special gauge will be required designed for larger tires.
- Maintain mated duals at equal inflation pressures
- Don't bleed air from warm tires to reduce pressure buildup
- Don't inflate tires to cold PSI rating beyond rim specifications
- Don't run one dual at low inflation pressure or flat
Tire Loading
Tire pressure is what enables your RV tire to support loads. Overloading your tires can have serious consequences for passengers
and your RV. Too much weight can cause stress on your RV's suspension system, brake failure, shock absorber damage, handling and
steering problems, irregular tire wear and possible tire failure. Excessive loads or underinflation can lead to an excessive amount
of heat and tire failure. If you discover that your tires cannot handle the load, lighten the weight of the load or install tires
with a higher carrying capacity. Remember to consult your owner's manual, a Goodyear retailer, or the RV manufacturer for information
concerning selection and installation of new tires.
Tire pressure should never be reduced below the vehicle manufacturer's recommended levels to support load conditions in order to
improve the ride quality of a vehicle. The difference in ride quality is not significant. When minimum inflation pressure requirements
are not met, tire durability and optimum operation can be affected.
Inflation Pressure for Uneven Vehicle Weight Distribution:
- Select a tire with load carrying capacity designed to handle the maximum load point
- For each axle determine the correct inflation pressure needed for that size tire to handle the maximum load
- Inflate all tires on that axle to this same inflation pressure